Pole-Wrap

We use only premium hardwoods for the veneer on our flexible panel products that take stain beautifully. Or, bring out the rich natural wood grain with just a couple coats of polyurethane. The design simulates that of a classic fluted column. The half inch wide vertical panels are bonded to a high quality flexible backing that is extremely tear and water resistant. 

Please note that Pole-Wrap is not a structured split column. It is a pliable sheet of decorative wood that is applied over existing structural support columns. Our products are pre-sanded and ready for finishing. Use an oil, alcohol or lacquer based primer for our MDF models and finish with any paint of your choice to match decor.

Our column covers are available in 8 ft. or 4 ft. lengths and easily cut to fit your exact column size.  Choose 12 in. width size for a standard 3 in. or 3½ in. diameter pole.  Use 16 in. width size for 4 in. diameter poles. Available in Red Oak, Light Maple, Cherry and also MDF that is best for paint finishing.

A circumference measurement around the column is important for determining column diameter and selection of the correct model size (use a tape measure or string). See Pole-Wrap Sizing Chart for diameter conversion and other helpful reference charts below. A similar chart is found on product packaging.
 

Application for Pole-Wrap Models
Pole-Wrap Size	Use for this Column Diameter	Type of Wood	Model #
12 x 96 in.	3 or 3½ in.	Cherry Maple Oak MDF	84128 83128 85128 87128
16 x 96 in.	4 in.	Cherry Maple Oak MDF	84168 83168 85168 87168
48 x 96 in.	All	Cherry Maple Oak MDF	84048 83048 85048 87048
12 x 48 in.	3 or 3½ in.	Oak MDF	85EX124 87EX124
16 x 48 in.	4 in.	Oak MDF	85EX164 87EX164
48 x 48 in.	All	Oak MDF	85EX484 87EX484

Downloads
Pole-Wrap Sizing Chart	Download File
Available Wrap Models	Download File
Available Cap & Base Set Models	Download File
Available Drink Shelf Models	Download File